Access Control Dealers

DSP-6LP Vehicle Detector for Exit Loop Detection Ultra Low Power Solar Friendly Plug and Play "Micro" Detector

For Printable Installation Manuals, Liturature and Blowups, Login and Go To the Registered Dealer Section.

Gate Dealers

Manufacturer's Page* *Sample of this manufacturer's products that are available from D.A.D.S., Inc. (Not all products that we handle may be listed) All trademarks are those of the manufacturer

	DADS Distributing to Dealers Since 1987

The DSP-6LP vehicle detector is designed for solar powered gate applications. This detector will operate on any voltage from 10 to 30 Volts AC or DC and draws approximately 1 milliampere while waiting for a car. The power LED winks continuously once per second to indicate the detector is operating in the low power mode. The DSP-6LP detector beats all competition for reliability, simplicity, and "no car" current consumption. These detectors are virtually crosstalk free in most applications. Working on battery-powered and other parking and access control loop applications, the DSP-6LP is preset to the normal sensitivity level used in parking/access control applications, and tunes itself to the best operating frequency. This micro-sized detector will automatically adjust its sensitivity level when used on different sized loops. Environmental conditions are constantly compensated with the DSP-6LP's HYPERTRACK software. FEATURES Loop Size - Works on any in-ground inductive loop from 20 to 1200 mH. Indicators - Separate Power and Detect LED’s. The green Power LED will wink continuously once per second under normal operation. The red Detect LED will turn on solid for a vehicle. Sensitivity - Automatic - compensates for large loops and large lead-ins. Output Ratings - Single output, 1 amp relay at 30 VDC Resistive - The relay common, NO, and NC contacts are available. Power - 10 to 30 Volts AC or DC. Approximately 1 mA (no car and all loop sizes) and less than 25 mA with a car on the loop. Size - Height: 1.52" Width: 2.9" Depth: 1.56" Connector - Removable 7-pin terminal block. Pin assignments are shown below - from left to right: 1 - Relay (NC) (opens for detect) 2 - Relay Common 3 - Relay (NO) (closes for detect) 4 - Power Common 5 - Power in (10 to 30 Volts AC or +DC) 6 - Loop 7 - Loop Operating Temperature -35°F to 165°F (-37°C to 74°C)

FEATURES Loop Size - Works on any in-ground inductive loop from 20 to 1000 uH. Fail Safe or Fail Secure Operation - Can be easily changed to either mode in the field. Power Brownout Call Memory – Power interruptions of short duration are ignored. If power fails for approximately three seconds or less the DSP-10 “remembers” a vehicle. Intelligent Power Protection – The DSP-10-LV is protected from damage if plugged into a higher voltage. No need to change a fuse or reset a circuit breaker, simply plug the detector into the proper voltage and it works. Indicators - Separate Power/Fail and Detect LEDs. Compact Size - Industry standard 11 pin connector in a small plastic case. FRONT PANEL SELECTABLE SWITCHES Sensitivity - Ten sensitivity settings. Frequency – Automatically tunes within one of four operating ranges. Outputs - Two separate relay outputs with features that are front panel programmable as follows: Output A - Main detection output. Can be modified by delay and extension. Factory set to be fail safe. Fail mode operation is easily changeable by internal jumpers. Output B - Can be set to one of the following: 1) True presence (no extension or delay) 2) Pulse on vehicle entering loop 3) Pulse on vehicle exiting loop 4) Loop Fail output Sensitivity Boost - Can be used in special applications to insure complete detection of high-bed vehicles. Hold time - Normal or extended hold time is selectable. Loop failure - If the loop fails (opens or shorts) the power indicator flashes. Output B can also indicate this condition if desired (see above). The option to "remember" an intermittent loop failure is also provided. Delay - Can be selected to ignore fast moving vehicles over the loop. Extension - Extends a call for slow moving vehicles. OPERATION The DSP-10 vehicle detector has been specifically designed to handle all parking, drive-through and access control applications. Working on virtually any size loop, the DSP-10 automatically tunes itself to the best operating frequency. Environmental conditions are constantly compensated with the DSP-10’s HYPERTRACK software. The DSP-10’s inherent noise filtering algorithms allow it to work reliably in any electrical situation. It can be used as either a safety loop or free exit loop detector. With the flexibility to be either “fail safe” or “fail secure,” it is the only parking detector you will ever need. DSP-10-LV 10 to 30 Volts, AC or DC With its compact size, front panel switch features, and built-in flexibility the DSP-10 is the most “user friendly” detector on the market today.

DSP-7LP Vehicle Detector for Hold Open Loops (formerly called safety loops) Ultra Low Power Solar Friendly Plug and Play "Micro" Detector

Welcome to DADSINCORPORATED.COM  D.A.D.S., Inc. Serving North America’s Door, Gate & Access Control Industry D.A.D.S., Inc. is a Distributor of Access Control Devices, Garage Door and Gate Openers, Accessories and Parts.

Fence Dealers

	WHOLESALE TO THE TRADE ONLY

Home

One or more of these items are occasionally listed in our Monthly Flyers.

	LOOKING FOR A DEALER WHO INSTALLS & SERVICES OUR PRODUCTS? Click Here to Receive a Referral

DSP-10   11-pin Plug-in Vehicle Detector The Only Loop Detector You Will Ever Need! Optional harness available for use on operators with out socket.

The DSP-7LP vehicle detector has been specifically designed for solar powered gate applications specifically for “fail safe” operations, such as on safety loops. This detector will operate on any voltage from 10 to 30 Volts AC or DC and draws approximately 1 milliampere while waiting for a car. The power LED winks continuously once per second to indicate the detector is operating in the low power mode. The DSP-7LP detector has many of the same features as our standard DSP-7 but beats all competition for reliability, simplicity, and "no car" current consumption.These detectors are virtually crosstalk free in most applications. Working on battery-powered and other parking and access control loop applications, the DSP-7LP is preset to the normal sensitivity level used in parking/access control applications, and tunes itself to the best operating frequency. This micro-sized detector will automatically adjust its sensitivity level when used on different sized loops. Environmental conditions are constantly compensated with the DSP-7LP's HYPERTRACK software. FEATURES Loop Size - Works on any in-ground inductive loop from 20 to 1200 ìH. Indicators - Separate Power and Detect LED’s. The green Power LED will wink continuously once per second under normal operation. The red Detect LED will turn on solid for a vehicle. Sensitivity - Automatic - compensates for large loops and large lead-ins. Output Ratings - Single output, 1 amp relay at 30 VDC Resistive - The relay common, NO, and NC contacts are available. Loop Failure - The green power indicator flashes twice per second if the loop circuit is open and 10 times per second if the loop circuit is shorted. This detector operates in the fail safe mode and will output a “Detect” for either of these loop failure conditions. This “Fail safe” detector should be used on “safety” loops. Power - 10 to 30 Volts AC or DC. Approximately 1 mA (no car and all loop sizes) and less than 25 mA with a car on the loop or while in a “Fail” condition Size - Height: 1.52" Width: 2.9" Depth: 1.56" Connector - Removable 7-pin terminal block. Pin assignments are shown below - from left to right: 1 - Relay (NC) (opens for detect) 2 - Relay Common 3 - Relay (NO) (closes for detect) 4 - Power Common 5 - Power in (10 to 30 Volts AC or +DC) 6 - Loop 7 - Loop Operating Temperature - -35°F to 165°F (-37°C to 74°C)

Security Dealer

Return to Home Page

Garage Door Dealers